Bare Feet Wanted

Featured Product: Schluter DITRA-HEAT

ditra-heat-1Now that it’s getting cold, wouldn’t it be soo nice to wake up, go to the bathroom, and have warm floors touching your bare feet? At Dalton Carpet One, we have installers who specialize in warming up your tile. There’s even a thermostat to adjust the temperature to your liking. Add a touch of luxury and comfort to your home with Schluter Systems DITRA-HEAT.

“Schluter®-DITRA-HEAT incorporates customizable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management, and support to ensure a long lasting installation.

  • The stud structure of DITRA-HEAT is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables
  • Nominal 1/4″ (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
  • Self-leveling compounds are not required to encapsulate the cables into the membrane
  • Available by the roll or by the sheet to accommodate various room sizes
  • Quick and easy to install and few tools are required
  • U.S. Pat. No. 8,950,141, and U.S. DES. PAT. No. D706459 / Canada Ⓓ Schluter Systems L.P. and other patents pending

ditra-heat
Floor Warming

DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems. Cables can be placed wherever heat is desired, without creating height differences in the floor. Self-leveling compounds are not required to encapsulate the cables, significantly reducing installation time and effort.

Uncoupling

Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. DITRA-HEAT provides uncoupling through its geometric configuration, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface.

Waterproofing

DITRA-HEAT provides reliable waterproofing. Its polypropylene composition protects the substrate from moisture penetration, which is particularly important in today’s building environment where most substrates are moisture-sensitive.

Vapor Management

The free space on the underside of DITRA-HEAT provides a route for excess moisture and vapor to escape from the substrate that could otherwise cause damage to the tile covering above. Thus, DITRA-HEAT effectively manages moisture beneath the tile covering.

Support/load distribution

When placed on a solid foundation, columns or pillars can support tremendous loads. The same physical principle applies to DITRA-HEAT installations. Column-like mortar structures are formed in and between the studs on the surface of the matting. Loads are transferred from the tile covering through these column-like mortar structures to the substrate. Since DITRA-HEAT is virtually incompressible within the tile assembly, the advantages of uncoupling are achieved without sacrificing point load distribution capabilities.”
ditraheat-kit-components
Content adapted from SchluterSystems.com

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s